INNOVATIVE SOLUTIONS FOR THE PRODUCTION OF BRICKS FROM WASTEWATER TREATMENT SLUDGE

Authors

  • Gabriel POPESCU Romanian Academy, National Institute for Economic Research, Center for Study and Research for AgroForestry Biodiversity “Acad. David Davidescu”
  • Nicoleta-Raluca JIANU Bucharest University of Economic Studies
  • Ioana-Corina MOGA Romanian Academy, National Institute for Economic Research, Center for Study and Research for AgroForestry Biodiversity “Acad. David Davidescu”
  • Mădălina-Teodora ANDREI Romanian Academy, National Institute for Economic Research, Center for Study and Research for AgroForestry Biodiversity “Acad. David Davidescu”
  • Aneta CHIVOIU North Giurgiu Technological and Industrial Park
  • Laurențiu CIORNEI Romanian Academy, National Institute for Economic Research, Center for Study and Research for AgroForestry Biodiversity “Acad. David Davidescu”
  • Mirela SIMION North Giurgiu Technological and Industrial Park

DOI:

https://doi.org/10.26458/2231

Keywords:

bricks, sludge, construction, waste, wastewater treatment

Abstract

Based on the need to recover various wastes such as waste from wastewater treatment plants, it is proposed to use sludge in the manufacture of various building materials as bricks. So far, bricks made of different materials and combinations of classical materials as burnt clay, cement, sand, but also of other unconventional materials, most of them coming from different wastes, are used in construction. In order to use the sludge for bricks fabrication, it is necessary to inert it and to obtain a moisture content below 80%. Also, the physico-chemical and ecological parameters must be suitable for sludge utilization and their values must be situated within the limits imposed by legislation. So, the sludge is centrifuged in order to reduce the moisture content from (90-95)% to a maximum of 80%, treated, then the sludge batches are characterised and finally the sludge is recovered by inert cement.

References

Calatan, G. et al., “Opportunities Regarding the Use of Adobe-bricks within Contemporary Architecture”, Procedia Manufacturing 46 (2020): 150-157.

Daheriya, R. and Singh, V. V., “A review of the use of Industrial waste and Sewage sludge for the production of bricks”, International Journal of Advance Research Ideas and Innovations in Technology 4(2) (2018): 2559-2561.

El Boukili et al., “Recycling of Olive Pomace Bottom Ash (by-Product of the Clay Brick Industry) for Manufacturing Sustainable Fired Clay Bricks”, Silicon (2021): 1-15.

Ganesh, A. C. et al., “Energy efficient production of geopolymer bricks using industrial waste”, IOP Conference Series: Materials Science and Engineering 872/1 (2020, June): 012154.

Gomes, S. D. C., Zhou, J. L., Li, W. and Long, G., “Progress in manufacture and properties of construction materials incorporating water treatment sludge: A review”, Resources, Conservation and Recycling 145 (2019): 148-159.

Hamada, H. M. et al., “Use of oil palm shell as an aggregate in cement concrete. A review”, Construction and Building Materials (2020): 265.

Huarachi, D. A. R. et al., “Life cycle assessment of traditional and alternative bricks: A review”, Environmental Impact Assessment Review 80 (2020): 106335.

Jittin, V., Bahurudeen, A. and Ajinkya, S. D., “Utilisation of rice husk ash for cleaner production of different construction products”, Journal of cleaner production (2020): 263.

José, A. and Castro, E., “Fuel savings and carbon dioxide emission reduction in a fired clay bricks production plant using olive oil wastes: A simulation study”, Journal of Cleaner Production 185 (2018): 230-238.

Korhonen, J. et al., “Circular economy as an essentially contested concept”, Journal of cleaner production 175 (2018): 544-552.

Lachheb A. et al., “Thermal insulation improvement in construction materials by adding spent coffee grounds: An experimental and simulation study”, Journal of Cleaner Production, 209 (2019): 1411-1419.

López-García, A. B. et al., “Application of Life Cycle Assessment in the Environmental Study of Sustainable Ceramic Bricks Made with ‘alperujo’(Olive Pomace)”, Applied Sciences, 11(5) (2021): 2278.

Maraveas, C., “Production of sustainable construction materials using agro-wastes”, Materials, 13(2) (2020): 262.

Munir, M. J. et al., “Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks”, Journal of Building Engineering 42 (2021): 102484.

Olacia, E. et al., “Sustainable adobe bricks with seagrass fibres. Mechanical and thermal properties characterization”, Construction and Building Materials (2020): 239.

Priyadarshini, M., Giri, J. P. and Patnaik, M., “Variability in the compressive strength of non-conventional bricks containing agro and industrial waste. Case Studies”, Construction Materials 14 (2021): e00506.

Ricciardi, P. et al., “Valorization of agro-industry residues in the building and environmental sector: A review”, Waste Management & Research 38(5) (2020): 487-513.

Saberian, M. et al., “Recycling of spent coffee grounds in construction materials: A review”, Journal of Cleaner Production,(2021): 125837.

Sujatha, A. and Balakrishnan, S. D., “Properties of Coconut Shell Aggregate Concrete. A Review”, Advances in Civil Engineering (2021): 759-769.

Taurino, R. et al., “Lightweight clay bricks manufactured by using locally available wine industry waste”, Journal of Building Engineering 26 (2019): 100892.

Xin, Y. et al., “Possible recycling of waste glass in sustainable fired clay bricks: A review.” International Journal 20(78) (2021): 57-64.

Xing, Y. et al., “Growing and testing mycelium bricks as building insulation materials”, IOP Conference Series: Earth and Environmental Science 121/2 (2018, February): 022032.

Zúñiga-Torres, B. et al., “Innovative Materials for Sustainable Construction”, Materials Science Forum 1023 (2021): 155-162.

Downloads

Published

2022-09-28

How to Cite

POPESCU, G., JIANU, N.-R., MOGA, I.-C., ANDREI, M.-T., CHIVOIU, A., CIORNEI, L., & SIMION, M. (2022). INNOVATIVE SOLUTIONS FOR THE PRODUCTION OF BRICKS FROM WASTEWATER TREATMENT SLUDGE. Annals of Spiru Haret University. Economic Series, 22(3). https://doi.org/10.26458/2231

Issue

Section

CASE STUDY